Name:Top protection plate manipulatorFunction description: suction cover plate manipulator, suck the new cover plate from the side of the conveyor, put it on the top of the board to be packaged, the maximum size of the cover plate is 2830mm*2100mm*12mm, the thickness is 1-12mm (most of the 4-6mm), weight: 15-70kg, and the through-laminator and its conveyor are used in conjunction with the conveyor and its conveyor, and the conveying positioning is accurateUnique control logic and mechanical mechanism: can effectively avoid suction multiple sheets at one time, need to optimize the plan in detai

Peculiarity of Automatic Roof Adding Rectangular Coordinate Manipulator:1. Multi-degree of freedom movement, the spatial angle between each motion freedom is a right angle.2. Automatic control, reprogrammable and all movements run according to the program.3. It is generally composed of control system, drive system, mechanical system, operating tools, etc.4. Flexible and multi-functional, due to the different functions of the operating tools.5. High reliability, high speed and high precision.6.

Workflow of Automatic Belt Conveyor For Gypsum Lines Or Long Wire Plate：The product is sent to the automatic arrangement stacking mechanism through the conveyor line, the mechanism will automatically stack the products in an orderly manner, temporarily stored on the product temporary storage line after stacking, the cardboard in the cardboard stacking storage machine will be sent to the pre-packaging host by the cardboard conveyor line, each piece of cardboard, the grabbing mechanism will grab a stack of products on the product temporary storage line into the pre-packaging machine for packagin

Technical solutions of Automatic Top Plate Cartesian Coordinate ManipulatorFigure 1 is the overall layout of the recommended two-axis handling robot solution. The main parts it contains are as follows:1. A two-axis handling robot.2. Robot base and bracket.3. Robot control system and electrical box, etc.4. Robot safety protection net, etc.The X-axis and Z-axis definitions of the robot are shown in Figure 1, and the gripper mechanism is to be designed. This plan is only a preliminary plan, which should be revised and improved after further discussion and demonstration by both parties.

Product introduction: Airport Using Luggage Wrapping Machines /Baggage wrapping machine is designed to pack luggage, single cargo, small cargo, etc. in airports, stations, terminals, logistics points and other places. It can wrap the object in all directions to prevent the phenomenon of damage to baggage cargo, moisture-proof, dirt-proof, and being exchanged, so as to play a protective role in the transportation process.

Lifting Equipment for Fully Automatic Unmanned Reciprocating Vertical Lift Conveyor:This full automatic unmanned heavy loading type vertical lifting conveyor is appropriate to lifting cartons, woven bags, plastic barrels and different merchandise up and down vertically.1 The fundamental frame1 Material: 80*80mm aluminum alloy profiles, linked and assembled by means of screwstwo Protective screening: exterior body adopts obvious natural glass2 Conveying system1 The most important chain makes use of carbon metal 16A-1 curler chain whose pitch is 25.4mm with W-2 bending plates bilaterally.two The

The fully automatic crisscross sword-threading strapping machine with integrated corner protectors and stretch film wrapping system empowers new energy photovoltaic manufacturers to achieve end-to-end damage-free packaging for components from production to transportation and storage. Compared to manual packaging, it demonstrates significant advantages in efficiency, cost-effectiveness, quality, and safety.1.

1. Outline of equipment Constructions of equipment are as follows.No.EquipmentQ’tyDescription1Robot1Without robot base2Standard Hand13Control box14Manual teaching box1With 10m cable5Emergency stop21 on control box and 1 on teaching box6Cable between control box and robot110m7Teaching memoryMax 120 blocks,90steps×90layers※Condition”blocks”×”steps”×”layers”≦45,0008External interlock signalsPlease refer to Interlock List in electrical drawings for the kinds. 2. General specificationsLayout type: Please refer to Layout Drawing attached.

Introduction of spiral belt conveyor:1. Transmission direction: downward2. Conveyed product: solid bag3. Product size: subject to the customer's product size4. Product weight: 20, 40Kg (maximum)5. Demand capacity: 800bags/hStructure of spiral belt conveyor machines:1. The central body is welded with carbon metal (5mm thickness). The exterior conveyor chain body is mounted from the pinnacle via the core body to the bottom.2. The outer conveying body is made of 304 stainless metal with a thickness of 2.5mm.3.

Roller Conveyor Trolley (Rail-guided Vehicle) requirements:Table height: subject to negotiation between the two partiesApplicable power supply: 380VLoad capacity: 1500kgDevice Description:Rail drive motor power: 1.5kwConveying motor power: 1.1kwRoller machine effective width: 1200mm Trolley roller machine length: 1485mm (speed frequency conversion adjustable, wheel inside with rubber)Effective width of trolley: 1200mm Trolley track length: 13291mm The motor of the roller conveyor and the motor of the trolley need to have brakesProduction Effect Pictures for Roller Conv

SUPPLY SCOPE:Strapping packing unit (incl. with reeling car)The strapping machine adopts TITAN (VK10K120-16 electric ironing type) strapping machine head imported from Germany. Strapping straps are adopted 12.5-15.5mm x 0.6-0.8mm strapping strap for PET machine. The strapping machine works with the foot bar unit to fix the wooden foot bar bar with the top plate.

Technical parameters of Automatic Ring Horizontal Wrapper Packing Machine1. Product specifications and packaging requirementsProduct Name: Door CoverProduct weight: 100kg(max)Door set length: 800mm-4000mm     Packing width 140-400mmPacking height 90-300mmThe horizontal sleeve and vertical sleeve of the door sleeve are stacked neatly before winding, and since the cross sleeve is shorter than the vertical sleeve, the horizontal sleeve and the head end of the vertical sleeve must be aligned before winding (refer to the customer's site photo).2.

Material Of PP packing strap for automatic strapping machine :Polypropylene wire drawing resin has many advantages, such as good plasticity, strong breaking tension, bending resistance, light specific gravity, high strength, good toughness, soft texture, non-absorbent, recyclable, smooth end surface, small wear and tear, many varieties, easy to use and so on. It has been widely used in various fields.PP packing strap for automatic strapping machine basic description:1. Polypropylene (PP) is the main raw material.

Here's how AMRs fluctuate and why they can be a higher desire in sure situations:Autonomy: The most significant difference is autonomy.AMRs don't rely on human operators to information them.They can navigate thru the coffee roasting plant independently,avoiding obstacles and following predefined routes.This eliminates the want for a dedicated operator.More informations or requirements, please contact with us at any time.AdyWhatsApp:+86-15634865861

Standard  specifications Of Full Automatic Unmanned Carton Bagging Machine:Mechanical dimensionsL2400 × W1700 × H1850mmCarton Size (L200～600) × （W200-450）(H=H+W/2<550)mmInbound speed22m/min (0-10 boxes/min)Size of adhesive filmW220 ～ 600mm (M-type folding barrel membrane)Film thickness30~80um (M-type folding barrel membrane)Conversion of carton adhesive filmCarton:（L+W）*2+160mmPower Supply220V/380V  50HZTable Height <600mmMechanical length including leveling of bag in boxStandard machine length 1800mmNon standard machine specification：Mec

Processing requirements of 90 Degree Roller Turning Machine:Taper roll carbon steel galvanized, frame rectangular pipe sprayed;Technical note of 90 Degree Roller Turning Machine:1. SEW motor 1.1KW, 380V, 50HZ, 3P;2. Speed: 72m/min;3.

Classification requirements:1.

Processing requirements of 90 degree roller turning machine:Cone roller carbon steel galvanized, frame rectangular pipe spraying;Technical Note:1.SEW motor 1.1KW, 380V, 50HZ, 3P;2. Speed: 72m/min;4. Quantity: 4 sets.2. Supply Range190 Drum Turning MachineTable4Contains the following equipment:1Rollerroot562Inner and outer platesset43Outriggerbranch124Pull rodbranch85Adjusting footindividual166Chain coverpiece47Motor platepiece48Sprocket wheelpiece49chainpiece5610SEW Reduction Motorset411partsset4 Working Conditions1.

Overall Technical Parameters:1. Hydraulic pusher:Pallet retention ejector, without side shift, without fork, without pallet retention function, the ejection structure is scissor structure2. Load capacity 1500KG, load loss distance of about 280mm, horizontal center of gravity of about 135mm (subject to actual design)3.

Vertical strapping with 2 x 0 straps of pallets Load dimensions including pallet ( L x W x H):1200~2280 mm L x 1200-2000 mm W x  650~2200 mm H (must be checked and confirmed).Main components of vertical strapping machine  1. Basic machine frame with two columns and cross beam, vertical carriage guides and chains2. Rack module, movable between two columns with carriage guide system3. Carriage drive with geared brake motor4. Strap track (chute) frame made of grooved aluminium profiles and fixed to machine frame, spring loaded short flaps to allow strap feed at

The influence of "Made in China" is gradually expanding, and the industrial manufacturing and logistics chain with Chinese mainland as the source has long formed a trend of radiating the world.

Horizontal Full Automatic Strapping Machine for Pallet is a strapping machine at one head appositively planned to a complete automation of the packaging lines. It is made with strong and heavy duty columns and has been appositively studied to allow a complete automation of packaging lines for food industries. It allows in the same time the strapping cycle.  Horizontal Pallet Full Automatic Strapping Machine  Strap P.E.T.Useful dimensions Width:16mm., thickness:0,6 – 0.9mm.Inside coil diameterInner core diameter 406 mm.

Horizontal Full Automatic Strapping Machine for Pallet is a strapping machine at one head appositively planned to a complete automation of the packaging lines. It is made with strong and heavy duty columns and has been appositively studied to allow a complete automation of packaging lines for food industries. It allows in the same time the strapping cycle.  Parameters Of Horizontal Strapping Machine headingStrap P.E.T.Useful dimensions Width:16mm., thickness:0,6 – 0.9mm.Inside coil diameterInner core diameter 406 mm.

Design parameters based on:Two consecutive shifts per day, each shift work for 12 hoursA total of 3 slitting linesThe monthly output is 1200 tons, the daily output is about 40 tons, the hourly material is about 2 tons, according to the average quality of 100 kg per pack, at least 20 packs of goods per hourThe minimum width of the cloth roll slitting is 100mmThe maximum height of the cantilever machine packaging is 1800mm and the minimum height is 500mmThe number of packaging layers is not less than 8 layers, and the number of system circle layers is adjustablePackaging efficiency requirements: