Introduction of spiral belt conveyor:1. Transmission direction: downward2. Conveyed product: solid bag3. Product size: subject to the customer's product size4. Product weight: 20, 40Kg (maximum)5. Demand capacity: 800bags/hStructure of spiral belt conveyor machines:1. The central body is welded with carbon metal (5mm thickness). The exterior conveyor chain body is mounted from the pinnacle via the core body to the bottom.2. The outer conveying body is made of 304 stainless metal with a thickness of 2.5mm.3.

Processing requirements of 90 degree roller turning machine:Cone roller carbon steel galvanized, frame rectangular pipe spraying;Technical Note:1.SEW motor 1.1KW, 380V, 50HZ, 3P;2. Speed: 72m/min;4. Quantity: 4 sets.2. Supply Range190 Drum Turning MachineTable4Contains the following equipment:1Rollerroot562Inner and outer platesset43Outriggerbranch124Pull rodbranch85Adjusting footindividual166Chain coverpiece47Motor platepiece48Sprocket wheelpiece49chainpiece5610SEW Reduction Motorset411partsset4 Working Conditions1.

Scheme of Intelligent Sorting And Conveying System For Manmade Board Industry:The inspection plate specifications are wide (1080-1830), long (2100-2745), working level: veneer transport 2350mm;The pallet transport height is 800mm, the scheme is at the exit of the butt sand saw line The pallet is reversed through the 360 rotary roller conveyor to enter our roller chain conversion conveyor into the lifting table in turn to raise the working height to 800, so that it enters the double-line double-entry plate destacking position through the roller chain conversion conveyor in turn for plate inspec

Classification requirements:1.

Design parameters based on:Two consecutive shifts per day, each shift work for 12 hoursA total of 3 slitting linesThe monthly output is 1200 tons, the daily output is about 40 tons, the hourly material is about 2 tons, according to the average quality of 100 kg per pack, at least 20 packs of goods per hourThe minimum width of the cloth roll slitting is 100mmThe maximum height of the cantilever machine packaging is 1800mm and the minimum height is 500mmThe number of packaging layers is not less than 8 layers, and the number of system circle layers is adjustablePackaging efficiency requirements:

Technical specifications and requirements:1) Table of technical parameters:Sequence Number, Equipment Name, Performance, Quantity1. Vertical conveyor machine load-bearing: 2T;Increase efficiency: 60 times per hour;Lifting speed: 24m/min;Whole power: 9KW 4 sets2. Loading capacity of inbound and outbound conveyors: 2000Kg;Conveying speed: 140 mm/s;Conveyor length: 2000mm;The height of the conveyor line is 650 mm (+50);Roller diameter: 89mm;Roller spacing: 127 mm;Reduction motor power: 0.75KW 12 sets2) Equipment requirements:Overall requirements:1.

Introduction to Belt Turning Conveyor:The turning belt conveyor can transport a extensive range of materials, which can transport a range of bulk materials, as properly as transport a range of small packing containers of items such as cartons and packaging bags. The shape of the turning belt conveyor has a forty five diploma turning belt conveyor, a ninety diploma turning belt conveyor, and a one hundred eighty diploma turning belt conveyor, which can meet the technical necessities of a number turning conveyance. The belt conveyor is geared up with PVC, PU and different materials.

 Specifications Profile Plate Conveyor System Automatic Online Packaging Line :MIN:609mm x 984mm x17mm（L x W x H）MAX:10000mm x 984mm x 35mm（L x W x H） Main components configurations for Profile Plate Conveyor System Automatic Online Packaging Line:Motor reducer: SEWFrequency converter: Siemens/AB/DanfossServo motor: SiemensPLC: Siemens/ABLow voltage apparatus: SiemensProximity/photoelectric switch: SICKPneumatic components: FESTO/SMCStacking typeA(Wood block quantity)B (Space scope between two wood blocks)C (Space scope between wood block and the sides)Length 609mm~914mm2 p

Main technology parameters1. Baggage Packaging Machine introductionBuggage Packaging is designed to wrap bags and associated objects for protection motive in airport.Film gives greater guide whilst the bags is being transport to shield from being damaged.The operator locations the bags on the platform and adjusts vertical rods to invulnerable bag in accordance the luggage's size.2. Technical parameter of Baggage Packaging MachineMax.

Non-woven Radial Packaging Machine Notes:Demand-side rewinder table height: 700mm (the height of the supplier's equipment drive roller from the ground needs to be designed to be 700mm);The rewinder to the winding machine rewinder is excessive, and the transport table is excessive, and the demander is responsible.Packaging Requirements:The number of winding turns can be setAutomatic reciprocating is possibleAfter each package roll, the film holder automatically returns to the fixed position.Other requirements:At the request of the demand side, after winding, it is necessary to discharge the

Roller Conveyor Trolley (Rail-guided Vehicle) requirements:Table height: subject to negotiation between the two partiesApplicable power supply: 380VLoad capacity: 1500kgDevice Description:Rail drive motor power: 1.5kwConveying motor power: 1.1kwRoller machine effective width: 1200mm Trolley roller machine length: 1485mm (speed frequency conversion adjustable, wheel inside with rubber)Effective width of trolley: 1200mm Trolley track length: 13291mm The motor of the roller conveyor and the motor of the trolley need to have brakesProduction Effect Pictures for Roller Conv

Gypsum Board (Building Boards, Man-made Board, etc.) Full Automatic Six-sided Wrapping Packaging SystemGypsum board is wrapped in off-line wrapping:1. Manually add corner guards and place labels on the gypsum board, the forklift takes the board online, the vertical rocker arm wrapping, adding automatically the gypsum bar pad leg, the horizontal wrapping, and the forklift takes the board offline.2.

1. Main technical parameters of Aerial work platform/Auto scissors lift:No.ItemPerformance Parameters1Working height （mm）137502The max height of the platform （mm）117503Minimum height platform（ mm）25704Extend horizontally（ mm）9106Platform carrying capacity （kg）3209Grade ability25%10Minimum turning radius （mm）230011Operating speedDown (s)5512Up (s）7013Closed car length(mm)247014Closed car width （m）1.1815Closed car height( m)2.5716Platform size  (m)2.30*1.17*1.117Ground clearance (mm)10018Driving wheel size (in)15X5X1119Weight (kg)291020Lifting motor (V/kw)24/4.521Ma

Peculiarity of Automatic Roof Adding Rectangular Coordinate Manipulator:1. Multi-degree of freedom movement, the spatial angle between each motion freedom is a right angle.2. Automatic control, reprogrammable and all movements run according to the program.3. It is generally composed of control system, drive system, mechanical system, operating tools, etc.4. Flexible and multi-functional, due to the different functions of the operating tools.5. High reliability, high speed and high precision.6.

Name:Top protection plate manipulatorFunction description: suction cover plate manipulator, suck the new cover plate from the side of the conveyor, put it on the top of the board to be packaged, the maximum size of the cover plate is 2830mm*2100mm*12mm, the thickness is 1-12mm (most of the 4-6mm), weight: 15-70kg, and the through-laminator and its conveyor are used in conjunction with the conveyor and its conveyor, and the conveying positioning is accurateUnique control logic and mechanical mechanism: can effectively avoid suction multiple sheets at one time, need to optimize the plan in detai

Technical specifications of Paper Roller Type Conveying And Packaging SystemChain pitch:P = 63.5 mmDriving speed:24 m/min the slat conveyor is designed with high driving speed to meet the production requirement and is frequency-controlledSlat width:B = 55 mmSlat length:L = 250 mmThickness:S = 8 mm  Stainless steel 304Features: The conveyor slat is made in V-Shaped, Angle: 170°.

Advantages of automated warehouse1.

Process Of Manmade Board Intelligent Packaging System:After the pallets enter the packing line in turn, the pallets are successively completed through chain transportation, including top lamination, automatic erection corner protection, automatic wrapping, automatic topping protection plate, and cushioning longitudinal and transverse strapping process, after the packaging is completed, the forklift passes the shipment, and the lifting chain conveyor transfers the pallet to the storage positionBasic parameters of Manmade Board Intelligent Packaging System:1.

Classification of Automatic Customized Sorting And Conveyor System:Chain sorter: flip disc / flip plate / wing disc / three-dimensional flip disc / table type with belt.Steel belt sorter: It is equipped with several lateral push-out devices on the steel belt conveyor.Tape sorter: transverse push-out type/oblique tape type/oblique roller type/rotary table type/bottom turning typeRoller sorter: transverse tape type/transverse push-out typeSlide transverse push-out type: plate type/roller table typeHanging sorter: with the hanging conveyor as the main body, with the corresponding item identi

PP Packaging Strap/Belt/Tape Details：PP Pacakaging Strap/Tape/Belt Specifications：itemvalueMaterialPPApplicationMachine PackingPlace of OriginChinaZhejiangBrand NameZHONGLIANModel Numberpp-strapColorsGreen Color etcDelivery & Shipping Pictures of PP Packaging Strap:Straping Pictures refrence:More information, please contact with me at any time.AdyWhatsApp:+86 15634865861

1. Main technical parameters of Automatic Lifting PlatformNo.ItemPerformance Parameters1Working height （mm）137502The max height of the platform （mm）117503Minimum height platform（ mm）25704Extend horizontally（ mm）9106Platform carrying capacity （kg）3209Grade ability25%10Minimum turning radius （mm）230011Operating speedDown (s)5512Up (s）7013Closed car length(mm)247014Closed car width （m）1.1815Closed car height( m)2.5716Platform size  (m)2.30*1.17*1.117Ground clearance (mm)10018Driving wheel size (in)15X5X1119Weight (kg)291020Lifting motor

Forklift Project Of Small Packaging Edible Oil Without Pallet Stacking1. Project Name: Forklift Project Of Small Packaging Edible Oil Without Pallet Stacking2. Scope of supply: Including below machines, but is not limited;A, Two sets of conveyors (the buyer provides his own)B, Two push-pull devicesC, Two hydraulic stationsD, the forklift blocks twoE, two sets of control systemsThe specific content is designed according to the site situation and the characteristics of the equipment supplier's own equipment.3.

Package sizeLine 1 corresponding specifications (excluding pad height):MIN:609mm x 984mm x17mm（L x W x H）MAX:10000mm x 984mm x 35mm（L x W x H）Line 2 corresponding specifications (excluding pad height):MIN:609mm x 915mm x42mm（L x W x H）MAX:12192mm x 915mm x118mm（L x W x H）Stacker DescriptionStacking lifting chain conveyorStacking lifting position chain conveyor is composed of 1 set of 12 meters long four-row chain conveyor, the conveyor adopts heavy-duty square pipe welded frame, effective length 12000mm, effective width 1010mm, height about 600mm, speed 10m/min, SEW gearmotor, freque

1. Packaging overview1.1 This equipment is a special equipment for automatically winding stretch film onto the carton.