Workflow of Automatic Belt Conveyor For Gypsum Lines Or Long Wire Plate：The product is sent to the automatic arrangement stacking mechanism through the conveyor line, the mechanism will automatically stack the products in an orderly manner, temporarily stored on the product temporary storage line after stacking, the cardboard in the cardboard stacking storage machine will be sent to the pre-packaging host by the cardboard conveyor line, each piece of cardboard, the grabbing mechanism will grab a stack of products on the product temporary storage line into the pre-packaging machine for packagin

Warehousing logistics refers to the bulk storage of bulk substances and commodities on a pallet foundation in massive warehouses. Among them, automatic warehouse adopts mechanized operation and records scheduling, which is an superior warehousing mode broadly diagnosed by means of the society and is extensively used in agency completed product warehousingThe completed product warehouse of the business enterprise is linked with the manufacturing workshop thru the air transmission line.

Brief Introduction Of Jacking Transplanting SorterJacking Transplanting Sorter Is Widely Used In Automatic Storage And Logistics System. Conduct Shunting And Merging Of Logistics Boxes Or Packing Boxes. Allocation Operation Is A Non Common Operation In A Physical System. This Equipment Can Be Used In Shunting And Distribution Operations. Diversion Refers To That The Conveying Line Is Divided Into Two Lines Along The Conveying Direction Of The Roadway. Generally, The Goods Are Transported In Categories.

Process Of Manmade Board Intelligent Packaging System:After the pallets enter the packing line in turn, the pallets are successively completed through chain transportation, including top lamination, automatic erection corner protection, automatic wrapping, automatic topping protection plate, and cushioning longitudinal and transverse strapping process, after the packaging is completed, the forklift passes the shipment, and the lifting chain conveyor transfers the pallet to the storage positionBasic parameters of Manmade Board Intelligent Packaging System:1.

The fully automatic crisscross sword-threading strapping machine with integrated corner protectors and stretch film wrapping system empowers new energy photovoltaic manufacturers to achieve end-to-end damage-free packaging for components from production to transportation and storage. Compared to manual packaging, it demonstrates significant advantages in efficiency, cost-effectiveness, quality, and safety.1.

1.

1. Main technical parameters of Aerial work platform/Auto scissors lift:No.ItemPerformance Parameters1Working height （mm）137502The max height of the platform （mm）117503Minimum height platform（ mm）25704Extend horizontally（ mm）9106Platform carrying capacity （kg）3209Grade ability25%10Minimum turning radius （mm）230011Operating speedDown (s)5512Up (s）7013Closed car length(mm)247014Closed car width （m）1.1815Closed car height( m)2.5716Platform size  (m)2.30*1.17*1.117Ground clearance (mm)10018Driving wheel size (in)15X5X1119Weight (kg)291020Lifting motor (V/kw)24/4.521Ma

Advantages of automated warehouse1.

APPLICATION OF AGV Unman ForkliftIndustrial layout - intelligent logisticsBMW Stacker AGVAGV in photovoltaic industryAGV in tyre industry Technical Parameters of AGV Unman Forklift:Parameter ItemParameter indexModelAGVBasic functionCarrying, liftingDeadweight300KGGuidance modeMagnetic navigationTravel directionForward and backwardDrive mode4WDForward speed10m/min~30m/minAddress reading modeRFID componentsLoad capacityCarrying 200KG (maximum load capacity measured under the optimal road surface)Lifting stroke400mmGradeability≤2°Minimum turning radiusR800mmLinear guidanc

PE Top Film Bottom Film Specifications:Material, name: PE covered filmFilm width: 1350mmThickness: 80 μm  Outer diameter: 260mm/350mmCore inner diameter: 76.2mm Single roll weight: 50kg/100kg (net weight)Material of PE Top Film Bottom Film :Polyethylene (PE) film    PE film has moisture resistance, low moisture permeability, is a blown film, thick texture, not easy to stretch and deform.Production process:Film blowing machine is a mechanical equipment that heats and melts plastic particles and then blows them into a film.

Usage Hot Sales PE Top/Bottom Cover Film: It can be used for packing quite a number pallets, paper, equipment and equipment, bulk items and cowl the pinnacle and backside of pallet , etc.PE Top Cover Film Specification(More specification,please contact with us at any time):Width (mm): 300-2000Thickness (mm): 0.05-0.40Effect Pictures of Pacaking Using Hot Sale Factory Price PE Top Cover Film:SHANGHAI Exhibition pictures:More information, please contact with us.

Hot Sales 20um/25um Wrapping PE Hand Use Stretch FilmHand Use Stretch Film Specification:Specification/ModelWidthThicknessNet weightPaper Core Inner DiameterSFM-1350500mm0.013mm15.00kg76mmSFM-1750500mm0.017mm15.00kg76mmSFM-2050500mm0.020mm15.00kg76mmSFM-2250500mm0.022mm15.00kg76mmSFM-2550500mm0.025mm15.00kg76mmSFM-2850500mm0.028mm15.00kg76mmSFM-3050500mm0.030mm15.00kg76mmLLDPE  MaterialMachine se stretch film produced from ExxonMobil Chemical Exxon and Dow Chemical Dow Imported linear Low_ Density Polyethylene (LLDPE) resins and Metallocene raw material.WarehouseWe have our own

Technical solutions of Automatic Top Plate Cartesian Coordinate ManipulatorFigure 1 is the overall layout of the recommended two-axis handling robot solution. The main parts it contains are as follows:1. A two-axis handling robot.2. Robot base and bracket.3. Robot control system and electrical box, etc.4. Robot safety protection net, etc.The X-axis and Z-axis definitions of the robot are shown in Figure 1, and the gripper mechanism is to be designed. This plan is only a preliminary plan, which should be revised and improved after further discussion and demonstration by both parties.

Hand Use Stretch Film Specification:Specification/ModelWidthThicknessNet weightPaper Core Inner DiameterSFM-1350500mm0.013mm15.00kg76mmSFM-1750500mm0.017mm15.00kg76mmSFM-2050500mm0.020mm15.00kg76mmSFM-2250500mm0.022mm15.00kg76mmSFM-2550500mm0.025mm15.00kg76mmSFM-2850500mm0.028mm15.00kg76mmSFM-3050500mm0.030mm15.00kg76mmLLDPE  MaterialMachine se stretch film produced from ExxonMobil Chemical Exxon and Dow Chemical Dow Imported linear Low_ Density Polyethylene (LLDPE) resins and Metallocene raw material.Warehouse of our stretch film:We have our own Large clean warehouse

Stretch Film Specifications of Portable Hand Held Film Puller:1. Hand mask2. The inner diameter of the paper core is 76mm3. Weight: 2-4kg4. Outer diameter of winding film: 140mm5. Stretch film width: 520mm (including core height, stretch film width 500mm)Portable Hand Held Film Puller requirements:1. Adjust the tension by damping pre-tension2. The weight of the film puller should be as light as possible3.

Specification of Good Net/Reticulated Film For Packaging Agricultural Silage Stretch FilmWidth500mmLength3000mStyleCustomizedUsePackingImported raw materials(LLDEP)Our corporation makes use of imported linear low density polyethylene (LLDPE) raw material from ExxonMobil Chemical, Chemical, Dow Dow Chemical and different corporations to produce our wrap films. Imported LLDPE raw material have greater first-class requirements and extra stringent manufacturing processes, ensuing in greater reliability and sturdiness of our products.

High Strength Hand Use Plastic Stretch Film Specification:Specification/ModelWidthThicknessNet weightPaper Core Inner DiameterSFM-1350500mm0.013mm15.00kg76mmSFM-1750500mm0.017mm15.00kg76mmSFM-2050500mm0.020mm15.00kg76mmSFM-2250500mm0.022mm15.00kg76mmSFM-2550500mm0.025mm15.00kg76mmSFM-2850500mm0.028mm15.00kg76mmSFM-3050500mm0.030mm15.00kg76mmFeatures & Benifites of hand use plastic film:Imported raw materials(LLDEP)Our company makes use of imported linear low density polyethylene (LLDPE) raw substances from ExxonMobil Chemical, Chemical, Dow Dow Chemical and different compani

FEATURES of Self-propelled Pre-stretch Film Wrapping Machine：1. Automatic walking pre-stretching and winding operation, which can work continuously for 8 hours when fully charged.2. The control system is controlled by a special system to control the inverter to drive the motor, control the action of the mechanical transmission mechanism, and realize stepless speed regulation, the system is stable and reliable, and the equipment is easy to use and maintain3.

Special Stretch Wrapping Film Packaging MachineT Series Pallet Wrapping Machine--T1650F Semi-automatic Pre-Stretch Wrapping Machine --Special stretch wrapping movie packaging machine. The wrapping tools is used in a quantity of packaging areas widely.

2、Main technical data of turntable arm wrapper: 2.1 technical date：1. Machine bearing: 2000Kg (max)2. Packaging efficiency: 30 load/hour (max) (calculated according to two layers of packaging) (10000 bottles/hour)3. Speed of conveyor line: 140mm/s4. Elevation of conveying surface: 500mm (to be determined)5. Rocker arm speed: 15rpm (max)6. Total power:~3KW7. Operating Weight: 2000Kg2.2、packing material Stretch film：3 inched diameter of core，500mm in width，the diameter of film is 260mm，film thickness:20－35μm 2.3、Site preparationCompressed air source:1.

Main technology parameters1. Baggage Packaging Machine introductionBuggage Packaging is designed to wrap bags and associated objects for protection motive in airport.Film gives greater guide whilst the bags is being transport to shield from being damaged.The operator locations the bags on the platform and adjusts vertical rods to invulnerable bag in accordance the luggage's size.2. Technical parameter of Baggage Packaging MachineMax.

Gypsum Board (Building Boards, Man-made Board, etc.) Full Automatic Six-sided Wrapping Packaging SystemGypsum board is wrapped in off-line wrapping:1. Manually add corner guards and place labels on the gypsum board, the forklift takes the board online, the vertical rocker arm wrapping, adding automatically the gypsum bar pad leg, the horizontal wrapping, and the forklift takes the board offline.2.

Main Performance of Trayless Semi Automatic Stretch Wrapping Machines:Control system:1. Human-machine interface control, the number and number of winding layers can be set;  2. Program-controlled unit all-in-one machine;           3. Photoelectric switch, automatically sense the height of the goods;4. Reinforced winding function, which can carry out special protection for a certain part;5. Top-over time setting function.Advantages of man-machine interface:1. Humanized intelligent parameter setting;2.

Technical specifications of Paper Roller Type Conveying And Packaging SystemChain pitch:P = 63.5 mmDriving speed:24 m/min the slat conveyor is designed with high driving speed to meet the production requirement and is frequency-controlledSlat width:B = 55 mmSlat length:L = 250 mmThickness:S = 8 mm  Stainless steel 304Features: The conveyor slat is made in V-Shaped, Angle: 170°.